Full Product Manual

7
Need help? For technical support call 305-614-4070 or visit us at www.ANZZI.com
Installation for hardwired
Step 1
Cut the plug and take out the wall mounting bracket (1)
fixed on the product near the power cord.
Step 2
Connect the wall mounting bracket (2) of the hardwired
wall mounting plate with screws and then pass the power
cord through the hardwired mounting plate.Secure the
wall mounting bracket to the corresponding standpipe
with the screw (9)
Step 3
Connect the power cord well and conduct a power-on test.
After confirming that everything is normal, fix the hardwired
mounting plate to the wall through screws, and fix the
remaining 3 brackets to the wall at the same time to
complete the installation.
Step 7
Place the four wall mounting brackets(1) of the electric towel rack
on the corresponding fixing blocks (6), then tighten the jacking
screws (7) with a hexagon wrench (11) and ensure that the brackets
adhere to the wall surface. After that, you can plug in the plug and
turn on the switch for use.