Installation Guide

Fasten wall bracket to towel warmer body.
INSTALLATION
PERFECTION IS OUR TRADITION™
pg. 3
Step 1
As shown in the picture, drill the short screw (6) through the hole in the metal bracket (1).
Step 2
Use the short screw (6) to secure the bracket onto the metal pad on the vertical bar of the
towel warmer.
Step 3
Fasten the short screw (6) using a screwdriver. Make sure the hole of the bracket (1) faces
towards the floor when the towel warmer is mounted.
Make sure hole Allen Screw
is facing toward floor.