Specification Sheet

Cleaning and Maintenance
3.Clean Filter and Flow Restrictor. 4.Remove the Toilet Seat.
(If you feel that the water flow is less than
normal, plesae close the supply stop.)
Close the Toilet Lid of the product, press the
Release Button
and slide the seat forward
as shown.This enables you to be able to clean
more thoroughly around the toilet. If necessary,
disconnect the Hose
before you do this.
a. Remove the Hose
and clean the Filter with a
toothbrush.
b. Remove the Flow Restrictor
with a needle-nose
plier and clean the sediment with a toothbrush.
c. Reinstall the Flow Restrictor
. Make sure it’s
installed in the correct orientation.
d. Reinstall the Hose
. Turn on the supply stop
and check for leaks. Retighten if necessary, but
do not overtighten.
1.Clean the outside parts of the product. 2.Clean the nozzle
Use a soft sponge or cloth with a non-abrasive
cleaner to clean the product. Never use hydrogen
chloride cleaner, diluent, benzene sandpaper,
polishing agent, perfume, pesticide and other
clenaing products.
Gently pull out the nozzle and use a soft
toothbrush to cleaner the nozzle.
Release Button
Toilet Lid
Hose
Filter
Flow Restrictor