Specification Sheet

3. Slide the Toilet Seat across the Base Plate
until you hear a click sound to make sure the
Toilet Seat
is secured.
4. Turn off the supply stop, then disconnect
the supply hose from the water tank. If you are
using a rigid supply line you will need to
purchase a flexible supply hose to install the
toilet seat.
Installation Steps
Supply
Hose
Hose
5. Install T-Connector to the Inlet and Supply
Hose as shown. Connect the other point of
Supply Hose
to the supply stop if you're
replacing the rigid supply with a new hose.
Connect the included Hose
on to the
T-Connector
and the toilet seat inlet with filter
between the T-Connector
and the Hose, washer
on the other side.
Inlet
T-Connector
Washer
6. Make sure the Knob on the toilet seat is at
the off position with lever pointing upward.
Turn the supply stop back on and check
connections at arrows for leaks. Retighten if
necessary, but do not overtighten.
Knob