Specification Sheet

Please read and and follow the installation and operation instructions carefully to ensure the seat's long

life and reliable operation. FAILURE TO DO SO COULD CAUSE PROPERTY DAMAGE AND SERIOUS

INJURY. Please keep this manual for future reference.

1.Water pressure range: 0.07-0.8MPa(10~116PSI).

2.Do not connect to a hot water supply. Providing water temperature above 104°F / 40°C will

damage the product and void your warrnty.

Installation Guideline

Installation Steps

1.Remove the old toilet seat. 2A-1.Press the Anchors into the toilet bowl

holes. If the anchor does not fit the bowl,

proceed to Step 2B, otherwise, skip Step 2B

and continue with Step 3.

toilet seat

2A-2.Position and adjust the Template

on the

bowl. Place and align the Base Plate

to the

slotted area of the Template

and then place the

2B. Position and adjust the Template

on the

bowl. Place and align the Base Plate

to the

slotted area of the Template

and then place the

Plate

and Screws as shown. Secure the Base

Plate by tighten the Nuts.

Plate

and Screws as shown. Secure the Base

Plate by tighten the Screws.

Plate

Base plate

Nut

Bolt

Template

Screw

Plate

Base plate