Specification Sheet

Symptoms
Water is too low
during Front/Back
wash
Probable Causes
1. Low water pressure of the unit
During Front/Back wash, turn the knob to a
higher setting
Raise the water supply pressure higher than
0.07 MPa (10 psi)
Turn on the water supply stop
Clean the filter of T-Connector
Clean the filter of water inlet hose
Take off and clean the nozzle head
Increase external water pressure
The maximum water pressure of the unit is
0.8 MPa (115 psi). If water supply pressure
is higher than that, please use pressure
reducing valve.
2. Low water pressure of water supply
1. Water shut-off valve is turned off
2. Filter of T-Connector is blocked
3. Filter of water inlet hose is blocked
4. Nozzle head is blocked
5. External water pressure is low
External water pressure is too high
Water dropping
from bowl when
using the unit
No water comes
out during
Front/Back wash
Recommended Action
Trouble Shooting
If the previous steps did not help to resolve your issue please contact us at 305-614-4070 or email us at
[e-mail].
Warning : It is highly recommended to not disassemble,
repair or modify the unit. Doing so risks further damage
to the product and voiding the warranty.