Installation Guide

11
Have questions? Call us at 1-844-44-ANZZI or visit us at www.ANZZI.com
A
B
C
1.Knob replacement.
3.Throttle valve replacement. 4.Water inlet pipe leakage maintenance.
2.Nozzle replacement.
5
Maintenance
2、Pull out the old knob directly along the axis
as shown in Figure B.
1、Turn the knob to the maximum position in
the hip washing direction as shown in Figure A.
1、After pulling out the conduit as shown in
Figure A, grab the conduit and pull out the old
nozzle directly along the axis.
1、Turn the knob to the working position and
clip the throttle valve out of the water inlet pipe
with pliers and other tools.
2、Press the new throttle assembly into the t
hrottle valve at the bottom of the inlet pipe and
replace it. Then turn the knob to the closed
position.
Throttle valve
If there is water leakage at both ends of the
inlet pipe, please tighten the nut again.
A
B
Sprinkler head
3、As shown in Figure C, pull out the new knob
along the old knob and insert the rib into the
corresponding control valve slot. After hearing
the "click" sound, the installation is completed.