Installation Guide

10
Have questions? Call us at 1-844-44-ANZZI or visit us at www.ANZZI.com
Throttle valve
Cleaning and Disassembly
1.Clean the external parts of the product.
3.Clean filter screen and throttle valve 4.Remove the product cover plate.
2.Clean the nozzle.
Use a smooth sponge or cloth with a neutral
cleaner to clean the product. It is forbidden to
use hydrogen chloride cleaner, diluent, benzene,
sandpaper, polishing agent, perfume, pesticide
and other cleaning products.
Gently pull out the nozzle and use a smooth
cloth, sponge or toothbrush to remove the
kitchen cleaner and wipe the nozzle.
Insecticides
Diluent
Sandpaper
2、Please clean throttle valve 0 ~ RING. (Refer
to Step 2 on Page 5 for removal and
installation of throttle valve 0-RING)
Braided hose
Filter screen
（If you feel that the water flow is less than
normal, please close the angle valve. )
1、Separate the water inlet hose from the
product and clean both ends of the filter
screen of the water inlet hose with a brush.
Close the upper cover of the product, press
the disassembly button with your hand, and
pull out the cover plate of the product in the
direction of the arrow shown in the figure to
disassemble.
Remove the button