ITEM: SP-AZ078 ANZZI AURA SHOWER PANEL INSTALL & OPERATION MANUAL V2.0 DON’T WAIT! REGISTER NOW! Register your product within 90 days to ensure your product is recognized as an purchase and is for warranty coverage. in the registry card (Pg. 2) or register at www.swcorp.com/register.
PRODUCT REGISTRATION∗ IMPORTANT: YOUR WARRANTY WILL NOT BE RECOGNIZEDUNLESSTHIS CARD IS FULLY COMPLETEDAND RETURNEDOR ONLINE REGISTRATION IS COMPLETED. To ensure that your warranty is registered and confirmed please do one of the following: 1. Register online at www.swcorp.com/register. You will be asked to fill out the same information you would in the registration card. Registering online is fast, secure and ensures we receive your information. 2. Complete, cut-out and mail the registration card below.
PARTS LIST 12 11 4 9 3 5 10 6 A 2 13 1 14 C 16 15 7 17 18 19 8 D B 20 Component no. Component 1 2 body head shower 3 4 pad screw 1 ABS EPDM s/s 5 6 clip pvc hose s/s pvc 7 8 9 knob plate cover knob cap s/s zinc 10 11 12 13 14 15 16 17 18 19 20 braided hose long- short connector Material s/s A. B. C. D.
BEFORE YOU START Recommended Items Screwdriver Adjustable Wrench Channel Locks Teflon tape G oggles Allen key Rubber hammer Pencil Tape Electric drill Read Before Using Your New Shower Panel Congratulations on purchasing our Shower Panel. Your new shower panel will be a great addition to your bathroom for years to come. Our luxury Shower Panel brings a spa experience into your life in the comfort of your personal bathroom.
Mounting the Brackets of the Shower Panel -It is recommended that the shower panel be mounted at a height that will make the unit accessible to people with varying heights. Establish the percise height and position of the unit on the wall. We recommend to leave a 12.68"(32cm) space between the shower head and the average height of the people in the house as well as a minimum distance of 1"(2.5cm) from the ceiling.
STEP 1 5"-16.5" Tape 13.4" C B ② ① A 1-1 Measure the distance A between the floor and the bottom of the shower column. Measure the distance B between the bottom of the shower column and the back bracket. Measure the distance C between the brackets at the back of the shower column body (1) 1-2 Project this measurement onto the wall in order to install the mounting brackets (2) 1-3 Mark the postion of each screw holes of both mounting brackets(2) on the wall using a pencil.
STEP 2 Figure A Figure B 1" Ø0.2 4" Figure C IMPORTANT Before drilling any holes for the shower panel brackets, be sure there are no hidden cables or pipelines aligned with the desired drilling position. 2-1 Drill the two holes for the top bracket 1” apart at the desired height. 2-2 Drill the two holes for the bottom bracket 1” apart below the top bracket. 2-3 Insert the wall anchors into the pre-drilled holes as shown in Figure B.
STEP 3 INSTALLATION (HANDSHOWER) 3-1 Insert the shower holder through the pre-drilled hole on the shower panel. 3-2 Connect the water supply hose to the shower holder,as shown. Make sure all washers are inserted to prevent leakage. 3-3 Once the shower panel is fully installed and hung on the bracket, you can install the hand shower hose to the holder connection. 3-4 Connecting the hand shower to the hose, as shown. Have questions? Call us at 305-614-4070 or visit us at www.ANZZI.com pg.
STEP 5 INSTALLATION Al on g 5-1 Remove the existing shower head and shower arm assembly. 5-2 Hold the plastic base against the wall.Wrap plumber tape around "A"position of adapter threads. Connect the adapter to the existing outlet. Bs ho rt Have questions? Call us at 305-614-4070 or visit us at www.ANZZI.com pg.
STEP 6 6-1 Make sure that the hoses are in the shower panel enclosure. 6-2 Connect shower panel water supply hose to the existing plumbing and the mixing valve. The mixing valve will not function properly if the connections are incorrect. Before hanging the shower panel onto the wall, turn on shut-off valves and test all water functions of the shower panel and check all connections for leaks. 6-3 Slide the shower panel down until it rests on the mounting brackets you installed.
CARE AND MAINTENANCE ANZZI® products are crafted with superior quality standards and workmanship and engineered to stand the test of time. However, that does not mean the product can be neglected and will need some care and cleaning. It is recommended to use regular soap and hot water along with a non-abrasive cloth or sponge to regularly clean the product. This avoids any nasty build up or deposits which would be tougher to remove.
