Specifications

Step 2 Checking and testing
Check all connections at arrows for leaks, re-tighten it if necessary.
Step 1 Faucet installation
3.Let the water run for one minute. Check all connections for leakage.
4.Apply teflon tap to the shower arm #2, put flange #1 and connect it to water supply pipe, after fixing the shower
arm, screw the shower head to the shower arm. ATTENTION: don't forget the o-ring between the shower
arm #2 and the shower head #3. Put the trim plate #14, fix it with screws #17, tighten them with screw driver,
and fix the handle #13 with screw #12, finally put the index #20.
BUT DON'T OVERTIGHTEN
1
2
O-ring
3
1.Remove the protect cover #5a and take out the screw #4 with the screwdriver, then remove the protect cover #5b.
2.Connect pipes with faucet as photo, pay attention to the connection of hot and cold water supply pipe.
14
17
13
12
20
2
1
5a
5b
4
4
3
1
Step 3 Cleaning and care
Daily cleaning and care are required in order to keep the product shining and
properly working.
1
2
3
4
Clean it with water and dry it with soft cloth.
Clean the product with gentle liquid or glass cleaner.
Don't use acid cleaner.
Don't clean with abrasive material, abrasive paper or knife.