ASSAI SERIES INSTALL GUIDE Model# SH-AZ036 PERFECTION IS OUR TRADITION™ v2.
TABLE OF CONTENTS Parts List Before You Start Spec Drawing Installation Care & Maintenance Warranty Registration Pg. 1 Pg. 2 Pg. 3 Pg. 4 Pg. 11 Pg. 12 Final Page YOUR REVIEWS MATTER! The ANZZI™ Family thanks you for your purchase and hopes you enjoy your very own ANZZI product for years to come! In the meantime let us know about your experience? We would love to hear your thoughts from the packaging to the quality and function of the product. Leave a review on www.ANZZI.
PARTS LIST NO . 1 2 Flange 2 Shower arm 3 Shower head 4 Screw 5 Protect cover Trim cap 6 3 7 6 8 Cartridge locknut 8 Cartridge 9 Sleeve Body 4 11 12 19 21 22 20 23 13 12 Check valve Ttrim plate 13 Knob 14 Handle 11 10 5 16 7 10 9 PART NAM E 1 15 Screw 16 Joint 17 Joint 18 Joint 19 20 Screw O-ring 21 Screw 22 23 Index Allen key 24 Spout 18 14 17 15 24 ASME A112.18.1/CSA B125.1 PERFECTION IS OUR TRADITION™ pg.
BEFORE YOU START Recommended Items Screwdriver Adjustable Wrench Channel Locks Teflon tape Goggles Allen key ATTENTION: Please read all instructions thoroughly including all warnings, attentions and notes before beginning installation. For any questions or concerns contact our dedicated technical support team at 1-844-44-ANZZI. PERFECTION IS OUR TRADITION™ pg.
SPEC DRAWING mm [inches] PERFECTION IS OUR TRADITION™ pg.
INSTALLATION 5c Figure 1 5b 5a 4 Step 1A Remove the protective covers (5a) and (5b) by turning counter clockwise and sliding them out. Step 1B Do not remove protective cover (5c) until you make sure the cover is flush with the finished wall. Step 1C Using a Philips screwdriver, unscrew and remove the two screws (4). Step 1D Now remove the remaining protective cover (5c). PERFECTION IS OUR TRADITION™ pg.
INSTALLATION Figure 2 Step 2A Connect all plumbing lines to the faucet valve as shown. Step 2B Make sure the hot and cold supply lines are connected to the pertaining sides. PERFECTION IS OUR TRADITION™ pg.
INSTALLATION Figure 3 Step 3A Turn on water and allow it to run for 1-2 minutes. Step 3B Check all connections and confirm there are no leaks before proceeding. PERFECTION IS OUR TRADITION™ pg.
INSTALLATION Figure 4 1 O-r i n g 2 1 O-r i n g 3 2 3 12 13 14 19 15 22 24 Step 4A Apply Teflon tape to the shower arm (#2) then place shower arm flange (#1) on shower pipe and screw shower arm to the pipe. Step 4B After shower arm is in place screw the shower head (#3) onto the arm. Important: Make sure the O-ring is placed in between the shower arm (#2) and the shower head (#3). PERFECTION IS OUR TRADITION™ pg.
INSTALLATION Figure 5 12 13 1 O-r i n g 14 19 2 3 12 13 15 22 14 19 15 22 24 Step 5A Put the trim plate (#12) through the faucet valve then fasten it with screws (#19) and tighten using screw driver. Step 5B Screw on the diverter knob (#13) to the valve. Step 5C Place the mixing valve handle (#14) secure with set screw (#15). Step 5D Finally, insert the index (#22). PERFECTION IS OUR TRADITION™ pg.
INSTALLATION Figure 6 24 1 O-r i n g 2 3 12 13 14 19 15 22 24 Step 6A Loosen the set screw on spout (#24) using allen key before sliding onto the supply pipe. Step 6B Re-tighten the set screw to fasten onto pipe. PERFECTION IS OUR TRADITION™ pg.
INSTALLATION Figure 7 FINAL Check the connections pointed by the arrows for any kind of leaks and re-tighten if necessary. Important: Please make sure not to over tighten. PERFECTION IS OUR TRADITION™ pg.
CARE AND MAINTENANCE ANZZI™ products are crafted with superior quality standards and workmanship and are engineered to stand the test of time. However, that does not mean the product can be neglected and will need some care and cleaning. It is recommended to use regular soap and hot water along with a non-abrasive cloth or sponge to regularly clean the product. This avoids any nasty build up or deposits which would be tougher to remove.
LIMITED LIFETIME WARRANTY ANZZI™ products are manufactured with superior quality standards and workmanship and are backed by our limited lifetime warranty. ANZZI™ products are warranted to the original consumer purchaser to be free of defects in materials or workmanship. We will replace FREE OF CHARGE* any product or parts that proves defective. Simply call 1-844-44-ANZZI (1-844-442-6994) to submit a warranty claim and request an RMA.
PRODUCT AND WARRANTY REGISTRATION To register your product and activate your Limited Lifetime Warranty contact us at 1-844-44-ANZZI or email us at support@ANZZI.com. Or, if preferable, fill out the form below then scan/fax/mail us a copy. Email: support@ANZZI.com Fax: 1-866-560-1060 Mail: ANZZI™ 5701 NW 35th Ave. Miami, FL 33142 In need of replacement parts? Visit www.SpaWorldParts.com ANZZI™ Product Registration Card Name..................................................................................
Perfection is our Tradition™
