Item: SD-FRLS05701** SD-FRLS05702** ANZZI GLASS SHOWER DOOR INSTALL & OPERATION MANUAL V1.0 DON’T WAIT! REGISTER NOW! Register your product within 90 days to ensure your product is recognized as an official purchase and is eligible for warranty coverage. Mail in the completed registry card (Pg. 2) or register online at www.swcorp.com/register .
PRODUCT REGISTRATION∗ IMPORTANT: YOUR WARRANTY WILL NOT BE RECOGNIZED UNLESS THIS CARD IS FULLY COMPLETED AND RETURNED OR ONLINE REGISTRATION IS COMPLETED. To ensure that your warranty is registered and confirmed please do one of the following: 1. Register online at www.swcorp.com/register. You will be asked to fill out the same information you would in the registration card. Registering online is fast, secure and ensures we receive your information. 2. Complete, cut-out and mail the registration card below.
1/4" 1/8" 1
Box Contents 1xInstallation Instruction. [1] 3xWall Plugs. [2] 3xScrews ST4x35. [3] 1x0.08" Allen Key. [4] 1x0.12" Allen Key. [5] 1xWall Bracket. [6] 2xFlat Head Screws ST5x35. 2xWall Plugs. [7] 1xHorizontal Rail. [8] 1xDoor Panel. [9] 1xFixed Panel. [10] 1xHandle Set. [11] 2xTop Rollers. [12] 2xFasteners. [13] 2xAnti-jumps. [14] 1xAluminum Seal. [15] 2xBottom Guides A (L&R). [16] 2xBottom Guides B (L&R). [17] 1xHole Cap. 1xScrews ST4x35. 1xWall Plug. L R [18] 1xWall Post . [19] 1xMagnetic Post.
Assembly Drawing [13] [7] [18] [12] [24] [5] [9] [1] [22] [2] [6] [11] [21] [8] [19] [10] [2] [17] [16] [3] [4] [15] [23] [20] [14] [1] 6xWall Plugs. [2] 4xScrews ST4x35. [3] 1x0.08" Allen Key. [4] 1x0.12" Allen Key. [5] 1xWall Bracket. [6] 2xFlat Head Screws ST5x35. [7] 1xHorizontal Rail. [8] 1xDoor Panel. [9] 1xFixed Panel. [10] 1xHandle Set. [11] 2xTop Rollers. [12] 2xFasteners. [13] 2xAnti-jumps. 3 [14] 1xAluminum Seal. [15] 1xBottom Guides A (R). [16] 1xBottom Guides B (R).
SD-FRLS05701** 48"*76" 1.1" 34" 76" 7.5" 1.8" 1.1" 25.5" 22.2" 47.6"-48.
SD-FRLS05702** 60"*76" 1.1" 34" 76" 7.5" 1.8" 1.1" 31.5" 28.1" 59.6"-60.
Installation Steps Step 1 [18] 1/4" 0.
Step 3 2 1 1 [12] [5] 2 [4] Step 4 1 [6] Flat Head Screw ST5x35 2 [16] [12] 1 [4] 2 7 [17] [2] Screw ST4x35
Step 5 View from inside 1 [11] 2 Insert the interior plastic part into the door panel [16] [13] 1 Insert the interior plastic part into the bottom guide [8] [3] 2 Step 6 1a [14] [23] 1b 1c 2 1 2 [15] 8
Step 7 [10] View from inside 3 2 2 [21] Door Panel 3 [22] Door Panel Step 8 [19] 9 Fixed Panel
Step 9 1 1 [20] 2 View from inside 2 Step 10 10
Turn over to install it to change the door from RH to LH.
