Installation Sheet

NOTICE: Doors wider than 30” will need an additional Stationary Glass Panel (11):
See Design “B” for installation and assembly of Stationary Glass with Support Bar.
DESIGN “B”:
ATTENTION: This assembly portion only requires the parts from Diagram “B” for the assembly and installation of the Stationary Glass.
Diagrams A and B are required for assembly of shower door with 6” small or 14”-30” large Stationary Glass.
21. Install the two Wall Bracket (24) through the notches on the Stationary Glass (11). Place the Anti-Water Strip (19) firmly on the vertical edge of the
Stationary Glass.
INSIDE
MARK
THESE
EDGES
MARK HERE
Ø
5
6
"
GLASS PANEL