Installation Guide
8
Fig
. 9
9.
Get three measurements:
from the top edge of the Glass door (02) to the top edge
of the upper Hinge (06);
from the bottom edge of the upper Hinge to the top
edge of the bottom Hinge;
from the bottom edge of the bottom Hinge to the
surface of the shower base Cut the Flanged anti-water
strip (12) according to the measurements.
Press the cut strips on to the vertical edge of the Glass
door. Press the Side anti-water strip (11) on the vertical
edge of the Return glass panel (03) with the flange
facing the door.
Press the Bottom anti-water strip (13) on the bottom
edge of the Glass door.
Install the Handle (05) to the Glass door.
See Fig. 10 for details.
Fig. 10
xxx
1
2
3
4
6
5