Installation Guide

Notice: This assembly requires two people due to the weight of the
glass doors. Professional installers are highly recommended.
1. Carefully inspect all boxes and packages to make sure no damage
occurred during shipping. If you find a unit has been damaged, is missing
parts, or has finishing defects, contact our customer support department
within 5 business days of the delivery date. Note: After 5 business days,
or if the product has been already installed, we will not replace any miss-
ing parts or damaged products.
Once all boxes and packages are inspected and opened, thoroughly read
through this instruction manual. Take time to view the “Detailed Diagram
of Shower Door Components” page and mark each piece as you ensure
all necessary parts required for assembly are included in the package.
2. Note: Keep in mind that we are not responsible for code compliance
standards for your project and we will not accept any returns. Plumbing
and building codes differ from one location to another, so it is crucial to
review your local building codes before installation to help answer any
questions you have about installation compliance standards.
3. Make sure the installation surface area is level, solid, and can sup-
port the entire weight of the unit and the walls are at right angles before
beginning installation. Major problems may occur if the surface area
isn’t level and side wall angles are abnormal. It is recommended that all
primary surfaces of the unit be protected during installation. Leveling
adjustments and drilling may be necessary depending on the unit being
installed.
4. Finished floor and walls are required for installation of this unit.
5. IMPORTANT: Each side of this door features a 1” out-of-plumb ad-
justment. Ensure your shower base or threshold is leveled and walls are
vertical.
Note: Be sure the CLEAR side of the glass with print, molded, or silk
designs faces the interior of the shower.
ATTENTION: Use caution when unpacking and inspecting your unit. For
easy part identification, refer to the detailed diagram in your manual and
lay out each piece accordingly. Do NOT discard cartons and hardware
bags until you have thoroughly checked for all parts. Contact us regarding
any missing or damaged parts.
NOTE: Keep these instructions for installation to refer to later.
GETTING STARTED