Installation Guide

10
Product maintenance
To ensure long lasting life for your acrylic back walls, wipe them off after each use
with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream
based cleaners. Never use abrasive cleansers, metal brushes or scrapers that could
scratch ordull the surface.
To ensure long lasting life for your glass shower products, wipe them off after each use
with a soft clo
th. Rinse and wipe of the glass using either soft cloth or squeegee to
prevent soap buildup. Never use abrasive cleaners and cleaning products that
contain scoring agent because this may scratch the surface. Never use bristle brushes
or abrasive sponges.
To assure a long lasting finish wipe off the metal parts after each use with a soft cloth.
Do not use abrasive cleaners or cleaning products containin
g ammonia, bleach or
acid. If accidentally used, rinse the surface as soon as possible to prevent finish
peeling or corrosion. After cleaning the shiny finishes, rinse thoroughly and wipe dry
with soft cloth. Clean stainless steel surfaces at least once a week. When applying
stainless steel cleaner or polish, work with (not across) the grain. Never use abrasive
sponge or cloth, steel wool or wired brus
hes.
Fig. 9
24 Hours
Wait 24 hours before
using the shower