Installation Instructions

3. Use the Glass Brackets (07) to attach the Upper Guide Rail (03) to
the Stationary Glass (02). Tighten the set with screws. Place the Door
Stoppers (01) on each end of the Upper Guide Rail (03) by using a
sliding motion. Temporarily secure them. Place the Guide Rail Brackets
(08) on each end of the Upper Guide Rail (03) by using a sliding motion.
Temporarily secure them.
Refer to Figures 3 for details.
NOTE: Before installing the Stationary Glass (02), lean the Glass
Door (05) gently against the shower area wall.
Figure 3
GLASS BRACKETS