= Rill Kitchen Sink Faucet {Singe Hole Pull Down) Installation 1. Rill a ¢1.3" ~ #1.38" hole, put the gasket {2} on the bottom of the faucet body. 2. Puttee faucet body {10} through the hog in the sink, then put an the rubber gasket {3} and metal gasket {4} in order, lock the nut {5), tight it with screw (7). 3. Install the weight balance (8} at suitable petition, allow approximately 100mm of spacing between the weight and where the hose curves.
