Full Product Manual

INSTALLATION

PG.5

STEP 5:

Turn on hot and cold water supplies and check connections at arrows for leaks. Retighten if necessary,

but do not over tighten.

6 7

[11]

[02]

[05]

(Diverter)

[05]

[14]

STEP 6:

Install and secure the Hand Shower [11] and

Shower Hose [14] to the Faucet as the

figure shows.

Note: Make sure there are washers between

the connections.

[02]

STEP 7:

Turn on the Handles [05], then turn the Handle

(Diverter) [05] to check the flow of spout and

hand shower. Check connections at arrows for

leaks. Retighten if necessary, but do not over

tighten.