Full Product Manual

INSTALLATION
PG. 4
STEP 3:
a. Mark the center point of faucet on the floor.
Then, mark the holes beside
the center point on the floor. Distance between
Cold and Hot
is 7.9"
water supply line
water supply line water supply
line
[200mm].
STEP 4:
Connect the Post [15] to the water supply lines
(which should be protruding from the ground and
have matching internal female threading).
b. Drill 1-1/8" holes at the water supply line
locations into the floor.
Note: Make sure to connect the left Post [15] to
the hot water supply line and the right Post [15]
to the cold water supply line.
3 4
Mark the
center point on the floor
Escutcheon [16]
Hot Water
Supply
Hot Water
Cold Water
Supply
Cold Water
Supply Lines with
1/2" female thread
a
b