Full Product Manual

INSTALLATION
9 10
[22][22]
[08][08]
[12][12]
[24][24]
[04][04]
STEP 9:
Install and secure the Hand Shower [12] and
Shower Hose [24] to the faucet as the figure
shows.
Note: Make sure there are washers between
the connections.
STEP 10:
Open the Handle [22], then turn the Handle
(Diverter) [08] to check the flow of spout and
hand shower. Check connections at arrows for
leaks. Retighten if necessary, but do not over
tighten.
PG .6
CLEANING & MAINTENANCE
1. To preserve the finish on the metallic parts of your ANZZI faucet, apply non-abrasive wax,
such as car wax. Any cleaners should be rinsed off immediately.
2. Clean the flow regulator regularly for calcium build up or any blockage that reducing water flow.