Installation Guide

ManualsBrandsANZZI ManualsBathroomViola Brushed Gold Ceramic Drop-In Rectangular Bathroom Sink with Overflow Drain (35.83-in x 20-in)

Table Of Contents

DON’T WAIT!

recognized as an ofﬁcial purchase and is eligible for warranty

coverage.

Mail in the completed registry card (Pg. 2) or register online

at www.swcorp.com/register

Item:

CS-

CTRCS00WH

CS-FRKD00**

CONSOLE SINK

INSTALL & OPE

RATION MANUA

V1.0

Summary of content (4 pages)

PAGE 1
Item: CS-CTRCS00WH CS-FRKD00** CONSOLE SINK INSTALL & OPERATION MANUAL V1.0 DON’T WAIT! REGISTER NOW! Register your product within 90 days to ensure your product is recognized as an ofﬁcial purchase and is eligible for warranty coverage. Mail in the completed registry card (Pg. 2) or register online at www.swcorp.com/register .
PAGE 2
PRODUCT REGISTRATION∗ IMPORTANT: YOUR WARRANTY WILL NOT BE RECOGNIZED UNLESS THIS CARD IS FULLY COMPLETED AND RETURNED OR ONLINE REGISTRATION IS COMPLETED. To ensure that your warranty is registered and conﬁrmed please do one of the following: 1. Register online at www.swcorp.com/register. You will be asked to ﬁll out the same information you would in the registration card. Registering online is fast, secure and ensures we receive your information. 2. Complete, cut-out and mail the registration card below.
PAGE 3
Overall Dimensions 35 7/8"Lx20"Wx34"H Basin Dimensions 19 11/16"Lx12"W Water Depth 5 11/16" Drain Hole 1 3/4" Faucet Type 1 3/8"(single hole) [4 /8" m] 0m 35 1 61 " [9 10 B 1pcs C 2pcs ] m 20 " [5 /2 01 m] 2 6 3/4" [170mm] ] ll wa 0mm e th 34 to /8" [ 3 13 31 1/4" [794mm] 2pcs mm 3 1/8" [80mm] 34" [864mm] 1 7/8 A D 2pcs E 6pcs F 6pcs G 6pcs H 1pcs Dia 1 1/2" [38mm] tube 30 7/8 " [7 85 mm ] level screw
PAGE 4
Section 2 Section 1 D Top leveler B H C E A Leg leveler 1.Connect front legs (A) and front crossbar (B). 2.Line up bolt holes where legs and crossbar connect. 3.Install the bolts but do not tighten them at this time. Section 3 drilling holes Φ1/4"(6mm) 1.Connect the support bars (C) to the front legs (A). 2.Line up bolt holes where legs and support bars connect. 3.Install the bolts and tighten all bolts for all parts at this time. Section 4 G F 1.