Owners manual

14885 Monte Vista Avenue

Read complete instructions

Chino, Ca. 91710

before installation!

888.360.3696

AnzoUSA™ products are covered, by a limited one (1) year warranty, to be free of manufacturer’s defects. However, certain AnzoUSA™

product categories have warranty policies which differ from this standard, please contact your representative for detailed category

information. Damage due to improper installation or road hazards is not covered. Seller and manufacturers’ only obligations shall be to

replace the product proven to be defective. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or

consequential, arising out of the use of or the inability to use the product. Before using, user shall determine the suitability of the

product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.

Tools needed: Phillips screwdriver.

Step 1: Remove the four

phillips screw to remove

the parking lights.

Step 2: Remove the

parking lights from the

vehicle.

Step 3: Twist off the

parking light bulb sockets.

Step 4: Twist off the bulb

from the socket.

Step 5: Twist the new Anzo

parking light bulb

connector to the socket.

Step 6: Replace the four

phillips screw.

Step 7: Test all functions

before driving.

Application: 1988-1998 Chevy Fullsize Truck

Improper installation may

www.anzousa.com

void warranty

Description: Parking light

Part Number: 511048-511050