User's Manual

MHPTV TX User Manual
MHPTV-USR-DOC-V3.0, 10/18/2019 Page 95 of 148
The ComCF screen is used to configure the TX maximum operating thresholds to
engage safety and protective power reduction and shutdown mechanisms. Press the
NextPage button to reach the FWD, REFL, and REJT power calibration screen below.
7. Press the word FwdPara to slightly adjust this value up or down (in small
increments 0.1, 0.2, etc.) until the FWD power meter reading on the
Controller HOME screen (also available via the Controller Web interface: RJ-
45 LAN default IPaddress 192.168.1.210) agrees with the value of forward
power you recorded from your power meter measurement.