User's Manual

MHPTV TX User Manual
MHPTV-USR-DOC-V3.0, 10/18/2019 Page 94 of 148
6. Navigate to the TX meter Calibration screen on the Controller by pressing the
CONFIG button and then selecting AmpCF (Amplifier Configuration)
The AmpCF screen is used to configure advanced settings of the TX System and
PAs and is locked with a password. When pressing the “AmpCf” button in the Config
Menu, a pop-up window requiring a password will appear. Please enter the “AmpCf”
password “27654” and then press “OK”.
With the password properly entered, the AmpCf configuration screen will appear,
as shown below. Press the ComCF button.