User's Manual

MHPTV TX User Manual
MHPTV-USR-DOC-V3.0, 10/18/2019 Page 81 of 148
8. Press the HOME button to return to the HOME screen to monitor FWD power
With the AGC engaged, the FWD power metering may vary up to +/- 5%, so
for a 1500W TPO, meter variations from 1425W to 1575W may be experienced.
9. For Dual Exciter TX configurations, test the Exciter switchover behavior by
pressing the A/B icon on the Controller touchscreen and initiating an Exciter
Changeover by selecting EXCITER B, and confirming the changeover when
asked. The power will drop and the exciter changeover will initiate. Once again,
allow 45 to 60 seconds for the transmitter to reach operating power. Make the
same performance checks as just outlined for Exciter A.
Set Target AGC
Power
to desired TPO
Press AGC button
to turn AGC ON
(will illuminate
Green)