User's Manual

MHPTV TX User Manual
MHPTV-USR-DOC-V3.0, 10/18/2019 Page 120 of 148
PosID Screen: Note: The PosID of each PA can be accessed and modified via the
PA built-in LAN interface (192.168.1.200). Networking directly to the PA and
pressing the System Set tab will bring up the following information. Here you can
view and change the SYS_ID for the PA (Note: SYS_ID for PA1=130, PA2=131,
PA3=132, PA4=133, PA5=134, PA6=135, PA7=136, PA8=137).
AmpxCf Screens: These screens are used to configure the Maximum PA operating
thresholds to engage safety and protective power reduction and shutdown
mechanisms.