Operation Manual

HOW TO USE THE ANYSEE APPLICATION
Functions
After installation anysee Series and scanning channel, you can watch the TV. This chapter explains
how to watch in mode. In Digital TV mode and Analog TV mode, after scanning channel and you
can watch TV.
Digital TV
Using change mode in control panel, switch digital TV mode.
Please move curser to left side in screen and select channel.
Turn mouse's wheel or using volume control button in control panel left, adjust volume.
Using record function, you can record the program in your computer.
Happened screen intermittently stops while proceeding or no sound generation, please refer to
“ Trouble shooting”
Analog TV
Using change mode in control panel, switch Analog TV mode
Please move curser to left side in screen and select channel.
Turn mouse's wheel or using volume control button in control panel left, adjust volume.
Using record function, you can record the program in your computer.
Happened screen intermittently stops while proceeding or no sound generation, please refer to
“ Trouble shooting”
S-video
Using change mode in control panel, switch S-video mode.
Input video signal to S-video terminal.
Input audio signal to Audio terminal.
Please check the external input setting in "capture".
Turn mouse's wheel or using volume control button in control panel left, adjust volume.
Using record function, you can record the program in your computer.
Happened screen intermittently stops while proceeding or no sound generation, please refer to
“Trouble shooting”
Video
Using change mode in control panel, switch video mode.
Input video signal to video terminal.
Input audio signal to Audio terminal.
Please check the external input setting in "capture".
Turn mouse's wheel or using volume control button in control panel left, adjust volume.
Using record function, you can record the program in your computer.
Happened
screen intermittently stops while proceeding or no sound generation, please refer to
“Trouble shooting”
52 / 82