Operation Manual

HOW TO USE THE ANYSEE APPLICATION
If the required channel was not found, Not Found window appears as shown below.
④ Signal : Disable in analog TV mode
⑤ Show the scanned channel.
TV : 0 → show the number of scanned TV program.
Radio : 0 → show the number of scanned Radio program.
⑥ Create New Channel List : If you hope to delete the priority channel list, please check and
make new channel list.
⑦ For manual scan, please input channel and frequency directly.
The frequency for each channel is different in a different country.
⑧ OK : Exit configuration.
42 / 82