Operation Manual

HOW TO USE THE ANYSEE APPLICATION
Mode
anysee E50 support Digital TV / Analog TV / Video / S-Video / Game Mode / File.
You can change the mode as below.
Digital TV : Watch the digital TV(HDTV or SDTV) which input the digital signal from Antenna or
Cable.
Analog TV: Watch the analog TV which input the analog signal from Antenna or Cable.
Video : Watch the video, sound from video camera, VCR, etc.
S-Video : Watch the video from input s-video signal.
Game : Use the Play station or Xbox, etc.
(if you use game instrument in video mode, it is appeared inconsistency of sound and Video)
File : Play the recording file on your hard disk.(According the file formats, it couldn’t play without
anysee recording files)
Scan Channel
There are two methods of scanning the channels, automatic scan and manual scan.
For automatic scan, perform the following sequence and for manual scan, move to menu 4.3.1.6) for
signal reception.
The performance of signal reception varies depending of the antenna capacity and locations.
Reception is not possible if the signal reception rate is below 50-60% even if the strength of signals
is over 80%. If the received signals are weak, try moving the antenna (directional antenna) slowly
left to right until the maximum reception rate is achieved.
When anysee is turned on after the installation of anysee program, a message, There is no channel.
Please scan channels first, appears. Click OK button and scan channel window appears.
38 / 82