User manual

AWR-501L (AWR Mobile Router)
AnyTime AnyPlace AnyWireless Data Solutions™ 5/39
1.2 Front & Back view
1) Power LED: A red light indicates connection to the power supply.
2) CDMA LED: A red light indicates that connection on the 1x or EV-DO or Hybrid port.
3) Wi-Fi LED: A red light indicates that the connection on the WLAN interface is available.
4) LAN LEDs: A red light indicates a connection to an Ethernet-enabled computer (ports 1-4) This LED
blinks during data transmission.
5) CDMA Antenna: Install a white lined antenna on the right side of the router
6) Wi-Fi Antenna: Install a blue lined antenna on the left side of the router
7) Reset Button: Press this button to restore the AWR-501L to its original factory default setting
- To restore AWR-501L to original factory setting, press and hold reset hole, and turn AWR-501L back
on. Keep it 3 to 4 seconds and then release the reset hole once until both Wi-Fi and CDMA LED light at
the same time.
8) Power On/Off Button
9) Receptor for Power Adapter
10) RJ11(“Telephon”) Port : For connection wire to phones
11) LAN Ports: These ports automatically sense the cable type when connection to Ethernet-enabled
 ⑨
⑨⑨
⑨ ⑩
⑩⑩
⑩ ⑪
⑪⑪
⑪
⑤
⑤⑤
⑤ 
 