User manual
AWR-501L (AWR Mobile Router)
AnyTime AnyPlace AnyWireless Data Solutions™ 24/39
Advanced Setup > LAN > LAN Setting
IP Address
If you want to change IP address of AWR-501L, enter new IP address and click “Apply”
Subnet Mask
Displays Subnet Mask address of AWR-501L
By default, 255.255.255.0 is set
Lease Time
This will adjust the Lease Time for you to receive IP from the gateway of AWR-501L
You may select the Lease Time from pull-down menu and change it by clicking “Apply”
If Lease Time exceeded, you may receive New IP again from AWR-501L
DHCP Server
Check whether you want DHCP Server to be enabled or not.
DHCP
Starting Address /
Ending Address
If you want to change IP address range of DHCP Server, enter new IP address range
and click “Apply:
DNS IP Address
If you want to change IP address of DNS Server, enter new IP address of DNS and click
“Apply:
<Note>
In case the internet is not available due to changing IP Address or DNS setting, press Reset button to
restore AWR-510L to its original Factory Default setting (see the page 5)
To change IP Address, you should use the IP Address you have changed when accessing
WEB-UI.