User manual

AWR-501L (AWR Mobile Router)
AnyTime AnyPlace AnyWireless Data Solutions™ 14/39
Advanced Setup > System > Firmware Upgrade
→Firmware Update
1) Download latest firmware from AnyDATA’s web site, and save it in hard drive.
2) Click Apply to configure IP Address and to browse firmware you have saved in your
hard drive. If you click “Apply”, you may encounter internet explorer security warning
message twice. In this case, you are required to click “Run”
3) Upon clicking RUN twice, you will have windows as below.
→From the window, enter IP address and click .
Please note that IP address, 192.168.2.1 will be displayed by default.
→Select the firmware you have saved in your hard drive by clicking , and click
.
Upgrading firmware will normally take 4 to 5minutes.
Improperly upgraded software may cause fatal error to AWR-501L.