Instruction manual

87
Getting Enter Text and Managing Your Pocket PC
2
2.8 AnyDATA Settings
How to configure the AnyDATA Settings
You can configure 4 tabs; USB to PC, USB charging, MIC AGC, and Wakeup Key.
1. Tap Start > Settings > System tab > AnyDATA Settings.
2. Adjust settings according to your use for each 4 tabs.
USB to PC tab
• When the built-in CDMA module is turned on, you can use it as a USB CDMA
Modem.
• If you use CDMA module as a USB CDMA Modem, then you cannot use
ActiveSync function.
USB Charging tab
• To charge your device using USB data cable, you need to enable the USB
charging mode in advance.
• When the device is in charging through USB data cable, do not use Voice call or
Data call.