Instruction manual

29
Getting Started
1
2
Charging LED This (bi-color) LED shows red and blue lights for indicating the battery
charging status. For details, refer to "1.6 About LED Features".
3
Receiver Listen to audio media or phone call.
4
CDMA Status LED This (bi-color) LED shows Green and Blue lights for indicating CDMA
status. For details, refer to "1.6 About LED Features”.
5
Volume Button Slide up or down to adjust the sound volume during a call or while playing
music.
6
Touch Screen Tap the screen with the stylus to select a command or write.
7
Memory CardSlot Allows you to use external microSD card for memory expansion.
8
Send Button Press to run the phone program, or to answer an incoming call.
9
Notification LED This LED is blinking when Notifications (new message arrived, missed call,
voice mail receiving, etc.) occur. It is also turned on when you press Send,
End, Volume, or Camera button.
10
Reset Button Press the Reset button using stylus to reset the device.
11
Multi-function Jack Connect the USB data cable to synchronize data or the stereo headset for
hands-free conversation or for listening to audio media.
Plug in the AC adapter to charge the battery.
12
Microphone With the microphone you can receive or make a phone call or make a
voice recording.
13
Track pad Drag your finger across the Track pad to move the cursor.
Press to confirm your selection or execute the selected application.
14
End Button Press to finish a call or to go back to the Today screen.
15
Camera Button Press to run the camera program; press again to take a photo or a video
clip, depending on the specified capture mode.
Press and hold down the button for 2 seconds to operate.