Instruction manual

132
Getting Connected
5
4. Tap and hold an item such as a tasks or a file to beam on your device.
5. Tap Menu > Send Contact > Beam to beam a contact. Tap Menu > Beam
[type of item] to beam other types of information.
6. Tap the device name to which you want to send the beam.
7. You can manually add an Outlook item that you beamed in case that it’s not
automatically added to Outlook. Click File > Import and Export in Outlook.
To beam information to a Bluetooth-enabled device such as another Pocket PC,
follow steps 3 to 6 in the above procedure.
[Note]
•
If the computer or device you want to beam does not appear in your device's
Bluetooth list, make sure that its Bluetooth is turned on and set to visible mode.
How to receive a Bluetooth beam
You need to set the device to detect incoming Bluetooth beams.
1. Tap Start > Settings > Connections tab > Beam.
2. Select the Receive all incoming beams check box.
3. Make your device be turned on and within close range of the device that is
beaming the information.
4. Tap Yes when prompted to receive an incoming beam.
Using the device as a Bluetooth modem
You can use the device as a modem for your PC through Bluetooth by connecting
the device to the PC.