User's Manual

4G Vehicle Tracker with Hotspot user Manual (ACT233L)

6 4G VEHICLE TRACKER WITH HOTSPOT SPECIFICATIONS

6.1 FORM FACTOR

 Dimensions : 80 x 55 mm, 22mm in Height

 Weight 78.4g

6.2 HARDWARE SPECIFICATIONS

 Full TIA/EIA/IS-98D/3GPP R8 LTE Compliance Assisted & Standalone GPS

 Operating Voltage 9 ~ 18V, (internally 3.5V for CDMA RF)

 Max Output Power 0.3W

 Light Sleep Mode (4mA @ 13.5V)

 Deep Sleep Mode (2mA @ 13.5V)

 Sensitivity Less than -104dBm for CDMA, -97dBm for LTE B4, -94dBm for

LTE B13(10MHz BW for LTE).

 Receive Frequency 869.04 ~ 893.97MHz for BC0, 1931.25 ~ 1988.75MHz

for BC1, 746 ~ 756MHz for B13, 2110 ~ 2155MHz for B4.

 Transmit Frequency 824.04 ~848.97MHz for BC0, 1851.25 ~ 1908.75MHz

for BC1, 777 ~ 787MHz for B13, 1710 ~ 1755MHz for B4.

 Wi-Fi/Bluetooth (4.0+LE) : 2402MHz ~ 2480MHz

 RKE (Remote Keyless Entry) : 300MHz, 319MHz, and 433.92MHz

6.3 SOFTWARE SPECIFICATIONS

 CDMA2000: CDMA2000 protocol IS-707-A.5: Packet Data Service for

Mobile and Base Station

 CDMA2000 1x EVDO r0, rA: EVDO protocol IS-856

 IS-95A/B: CDMA protocol TIA/EIA-637: Short Message Service for Mobile

and Base Station

 IS-801 & TIA-801-A: Position determination Built-in TCP/IP service

standard for Dual-Mode spread spectrum systems

 LTE: LTE protocol TS36.521, 3GPP R8 Cat3