#3 Scanning rotor of the washing bucks At washing mode, the rotor at the bottom of the washing bucket will rotate at high speed. If the rotor rotates. abnormally after long-term use, you can replace the stainless steel bearing in the rotor (there Is PCs spare bearing in the package). The process is shown below. Lasagna a discussant £3 arena the roar # 5 FF Fees weer hays Ale rein th Se an seu oid basing, install rope Knowing the vps sequence show ag rf chive : Troubleshooting 2. Vise machine dos not work.
Packing list Product Overview lid:blocks 99.995% of UV light and plays protective role. @Mode button press It to switch the mode {wash or cure). @Timadisplay:to tell the time, @Time knob turn the knob to set the cleaning or curing time, ranging from 1to 60 minutes. “UY gin ester: Shantung L428 LV LIGHT METER lid sensor:to detect if the antioxidant is covered in curing Meade. @Power socket: to connect the external adapter, @Power switch:turn on/off the machine @FUDDLED panel:for model curing.
2.Place the washing bucket firmly on the platform by the indentation. {Note The caving table and reflector met be took off If they are on the platforms.) 3.Switch the machine to wash mode by pressing the mode button (The default mode is wash}. Then tum time knob to set washing time and press the knob to start. . ooo ‘tips: The washing halts when time knob is pressed halfway. 4 When washing is completed, a beeping sound wil indicate it's finished.
