Instructions

14
‘tell’ the machine Z axis is getting to zero and stop moving.
(3) Therefore, tighten Z adjustable nut by X mm if nozzle is lower than the platform
( X is defined by how much the nozzle is under the platform), while loosen it by Y mm if
nozzle is too high from the platform ( Y is defined by how much the nozzle is above the
platform). It may need adjustment for few times.
(4) Click “Tools”-->“Home”-->“Home all” to verify the results. After this, please
level the platform again from Step 3.
Tighten or loosen it
Z adjustable nut
(Figure 13)
(Figure 14)