i Any cubic 3D User Manual 1. Install WIFI antenna Install the antenna to ensure the following operation. a i Photon Mono SE Photon Mono X Photon Mono WIFI connection Enter the WIFI account and WIFI password into Wifeless. The WiFi must be the same to which your smart phone connects to. Also, please connect to 2.4Ghz band. Pay attention to the following tips when you connect WIFI: + The name and format of the file “Netflix" cannot be changed.
3. Connect 3D printer to smart phone (with a same WIFI) (1) Download Any cubic 3D App Android users can visit our website to download. 10S user can search “ANY CUBIC 3D” in App Store to download it. (2) Add 3D printer ® Click “System” — “Info” to find IP address of the printer. Open Any cubic 3D, click “User” —"Device List” to add the printer.
Note: Multiple 3D printers can be added to device list, but only one can be connected at a time. 4, Remote control (1) File list Click “File” on the menu bar, check and preview the sliced file in the USB memory stick which is connected to 3D printer. Swipe left to delete the file; long press to select several files to delete. Click to select a model and then click * “icon to enter “Print” interface.
(2) Control printing and set print parameter Enter “Print” interface to control the printing process. Click to stop printing Stop state, click to start printing Print state, click to pause printing Paused state, click to continue printing Click the “Icon on the top right corner to set print parameters.
