User manual

Installation 5 (30)
3 Installation
Caution
This equipment emits RF energy in the ISM (Industrial, Scientific, Medical) band.
Make sure that all medical devices used in proximity to this device meet
appropriate susceptibility specifications for this type of RF energy.
This product contains parts that can be damaged by electrostatic discharge (ESD).
Use ESD prevention measures to avoid damage.
Make sure that you have all the necessary information about the capabilities and restrictions of
your local network environment before installation.
For optimal reception, wireless devices require a zone between them clear of objects that could
otherwise obstruct or reflect the signal. A minimum distance of 50 cm between the devices
should also be observed to avoid interference.
The unit can be screw-mounted onto a stable flat surface using the included wall mounting
plate, or pole-mounted using the included adjustable steel band straps.
To prevent water intrusion, the unit should be installed with the connectors on the
bottom panel facing down.
3.1 Overview
Fig. 2 Overview
1, 2 Antenna connectors
3 Power connector (M12)
4 LED indicators
5 Reset button
6 Ethernet connector (M12)
Anybus
®
WLAN Access Point IP67 User Manual SCM-1202-094-EN 1.0