User manual

Configuration 25 (30)
4.7.2 Configuration
Fig. 31 Configuration
This page allows you to save and restore configurations.
Configuration
Label Description
Download Click to save the current configuration as a file on your computer.
Choose File/Upload Click on Choose File to locate a saved configuration file, then click on Upload to
install it. The unit will automatically validate the configuration file and then restart
the unit with the uploaded configuration.
4.7.3 Firmware Upgrade
Fig. 32 Firmware upgrade
1. Download the firmware file from www.anybus.com/support and save it to your computer.
Make sure that the file is the correct one for your access point model and version.
2. Click on Choose File and select the downloaded firmware file.
3. Click on Start Upgrade to apply the new firmware.
The unit will reboot automatically when the upgrade is completed.
Do not power off the unit while the upgrade is in progress as this may put the unit
in an unrecoverable state.
Anybus
®
WLAN Access Point IP67 User Manual SCM-1202-094-EN 1.0