User manual

Configuration 18 (30)
4.4 Advanced Settings
4.4.1 Filters
Fig. 20 Filters
Allows you to set up MAC filters to allow or deny wireless clients to connect to the access point.
You can add a MAC address manually or select one of the currently associated clients.
Filters
Label Description
MAC Filter Enable/disable MAC filtering
Options Select to allow or deny access for the listed MAC addresses
Associated Clients Select the MAC address of a client, then use the Copy To dropdown to add it to the
desired slot in the filter table.
MAC Filter Table Enter MAC addresses to be filtered
4.4.2 Misc. Settings
Fig. 21 Additional settings
Misc. Settings
Label Description
UPnP Enables or disables UPnP
LLDP Protocol Enables or disables the LLDP protocol
Anybus
®
WLAN Access Point IP67 User Manual SCM-1202-094-EN 1.0