User manual

Configuration 17 (30)
4.3.2 Wireless Options
Fig. 19 Wireless options
Wireless options
Label Description
Radio Enable/disable the WLAN interface.
Wireless Mode Select 2.4 GHz or 5 GHz operation.
SSID Broadcast Select if the SSID of the unit should be broadcasted or not.
Beacon Interval
These settings are for advanced configuration only and should normally be
left at their default values.
DTIM Interval
Fragmentation Threshold
RTS Threshold
Preamble
Tx Multicast Rate
HT Require
HT Band Width
HT Guard Interval
HT Extension Channel
HT Tx STBC
HT Rx STBC
HT LDPC
Anybus
®
WLAN Access Point IP67 User Manual SCM-1202-094-EN 1.0