User manual

Configuration 9 (30)
4 Configuration
Anybus WLAN Access Point IP67 is configured via the built-in web interface which is accessed
by pointing a standard web browser to the IP address of the access point. The default IP
address is 192.168.0.2. The computer accessing the web interface must be in the same IP
subnet as the access point.
The web interface is designed for the current stable versions of Internet Explorer,
Chrome, Firefox and Safari. Other browsers may or may not support the full
functionality of the web interface.
Fig. 7 Home page
Configuration Menu
Home Click on Run Wizard to perform a quick basic configuration of the Anybus WLAN
Access Point IP67.
For manual configuration or to modify the settings applied by the wizard, see the
descriptions of the configuration options in the following sections.
Overview Basic information about the access point and the Ethernet and wireless networks
Basic Settings Basic settings for the access point and the LAN interface
Wireless Settings Basic settings for the WLAN interface
Advanced Settings Advanced settings for the WLAN interface
Event Warning
Settings
Settings for alarm messaging and fault indication
System Status Detailed information about network connections and traffic
Administrator Password settings, configuration backup, unit reset, etc.
Logout Click to log out from the Anybus WLAN Access Point IP67.
Anybus
®
WLAN Access Point IP67 User Manual SCM-1202-094-EN 1.0