User manual

Installation 8 (30)
3.5 LED Indicators
Fig. 5 LED indicators on bottom panel
PWR1
Green
Power supplied on Power Input 1
PWR2 Green
Power supplied on Power Input 2
PoE Green
Power supplied on Ethernet port
ETH
Off No LAN
Green LAN link established
Green, flashing LAN traffic
WLAN
Off No WLAN
Green WLAN link established
Green, flashing WLAN traffic
3.6 Factory Reset
Fig. 6 Reset
To restore the factory default settings, press and hold RESET on the front panel until the power
LED indicator(s) starts to flash, then release the button.
Anybus
®
WLAN Access Point IP67 User Manual SCM-1202-094-EN 1.0