Instructions
Table Of Contents
- 1 Preface
- 2 Description
- 3 Installation
- 4 Configuration
- 4.1 General
- 4.2 Web Interface
- 4.2.1 System Overview
- 4.2.2 Easy Config
- 4.2.3 Network Settings
- 4.2.4 WLAN Settings - Client
- 4.2.5 WLAN Settings - Access Point
- 4.2.6 Bluetooth Settings – General
- 4.2.7 Bluetooth Settings – PANU Mode
- 4.2.8 Bluetooth Settings – NAP Mode
- 4.2.9 Bluetooth LE Settings
- 4.2.10 Firmware Update
- 4.2.11 AT Commands
- 4.2.12 System Settings
- 4.3 Factory Restore
- A Configuration Examples
- B Wireless Technology Basics
- C Technical Data
Configuration 27 (40)
4.2.12 System Settings
Fig. 18 System Settings
Device Info
Device Name
Enter a descriptive name for the unit.
Password Enter a password for accessing the web interface.
Reboot System Reboots the system without applying changes.
Cancel All Changes Restores all parameters in the web interface to the currently active values.
Factory Reset
Resets the unit to the factory default settings and reboots.
Setting a secure password for the unit is strongly recommended.
Settings Backup
Create Settings Backup Click on Generate to save the current configuration to a file on your computer.
Restore Settings Click on Choose file and select a previously saved configuration, then click on Load. The
settings in the saved configuration will be applied and the unit will reboot.
General Configuration
Reboot System Reboots the system without applying changes.
Cancel All Changes Restores all parameters in the web interface to the currently active values.
Factory Reset
Resets the unit to the factory default settings and reboots.
Anybus
®
Wireless Bolt
™
User Manual
SCM-1202-007 2.6 en-US