Instructions
Table Of Contents
- 1 Preface
- 2 Description
- 3 Installation
- 4 Configuration
- 4.1 General
- 4.2 Web Interface
- 4.2.1 System Overview
- 4.2.2 Easy Config
- 4.2.3 Network Settings
- 4.2.4 WLAN Settings - Client
- 4.2.5 WLAN Settings - Access Point
- 4.2.6 Bluetooth Settings – General
- 4.2.7 Bluetooth Settings – PANU Mode
- 4.2.8 Bluetooth Settings – NAP Mode
- 4.2.9 Bluetooth LE Settings
- 4.2.10 Firmware Update
- 4.2.11 AT Commands
- 4.2.12 System Settings
- 4.3 Factory Restore
- A Configuration Examples
- B Wireless Technology Basics
- C Technical Data
Configuration 25 (40)
4.2.10 Firmware Update
To update the firmware in the unit, click on Browse to select a downloaded firmware file, then
click on Send to send it to the unit.
Fig. 15 Firmware update in progress
Both progress bars will turn green when the firmware update has been completed. The unit will
then reboot automatically.
Fig. 16 Firmware update completed
Updating the firmware will not change the configuration settings.
Anybus
®
Wireless Bolt
™
User Manual
SCM-1202-007 2.6 en-US