Instructions
Table Of Contents
- 1 Preface
- 2 Description
- 3 Installation
- 4 Configuration
- 4.1 General
- 4.2 Web Interface
- 4.2.1 System Overview
- 4.2.2 Easy Config
- 4.2.3 Network Settings
- 4.2.4 WLAN Settings - Client
- 4.2.5 WLAN Settings - Access Point
- 4.2.6 Bluetooth Settings – General
- 4.2.7 Bluetooth Settings – PANU Mode
- 4.2.8 Bluetooth Settings – NAP Mode
- 4.2.9 Bluetooth LE Settings
- 4.2.10 Firmware Update
- 4.2.11 AT Commands
- 4.2.12 System Settings
- 4.3 Factory Restore
- A Configuration Examples
- B Wireless Technology Basics
- C Technical Data
Configuration 14 (40)
4.2.2 Easy Config
Fig. 7 Easy Config page
To activate an Easy Config mode, select it from the dropdown menu and click on Set. The mode
will be activated immediately.
Easy Config Modes
EC
Role
Description
1 Bluetooth PANU
Configure as Bluetooth client and scan for another client (PANU–PANU).
2
–
Reset configuration to factory defaults.
3
–
Reset IP settings to factory defaults.
4
Client
Wait for automatic configuration.
5 WLAN AP
Configure units in mode 4 as clients.
Restart as access point and connect clients.
6
Bluetooth NAP
7 WLAN AP
Configure units in mode 4 as clients.
Restart as access point and connect clients.
Apply PROFINET optimization to all units.
8
Bluetooth NAP
9 Bluetooth PANU
Configure as Bluetooth client and scan for another client (PANU–PANU).
Apply PROFINET optimization to both units.
10
(any) Apply PROFINET optimization and restart.
11
(any)
Enable PROFIsafe mode.
Anybus
®
Wireless Bolt
™
User Manual
SCM-1202-007 2.6 en-US