Instructions

AT Commands 70 (84)
3.10.5 AT*BGCDCD Discover All Characteristic Descriptors
Note: Only available when the device is in central operating mode.
AT*BGCDCD=
Discover all descriptors of a characteristic.
Syntax:
AT*BGCDCD=<con_handle>,<value_handle>,<service_end_handle>
Input Parameters:
Name
Type Description
con_handle
Integer
Connection handle.
value_handle
Integer
Handle of the characteristic value.
service_end_handle
Integer
End handle of the service which the characteristic belongs to.
Output Parameters:
Name
Type Description
char_attr_handle
Integer
Decimal formatted handle to the characteristic.
attr_handle
Integer
Decimal formatted attribute handle.
uuid
String
128-bit UUID on the format 00112233-4455-6677-8899-aabbccddeeff,
00112233445566778899aabbccddeeff or 16-bit UUID on hexadecimal
format 0011.
Example:
AT*BGCDCD=<con_handle>,<value_handle>,<end_handle><br>*BGCDCD:
<char_attr_handle>,<attr_handle>,<uuid><br>OK
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide
SCM-1202-004 1.7 en-US